Engineering and Design

New pipe-handling equipment serves upstream, midstream operators

By Jeannie Stell, Editor,
Standardized automation control keeps the Rockies Express Pipeline on track

By Steve Pulsifer, Rockwell Automation
Expanding pipelaying options

By A Staff Report
Investigating plastic pipe integrity

By Dr. Gene Palermo and Dr. Dane Chang
Designing and engineering a carbon dioxide pipeline

By Jeff Layne, Kinder Morgan
Completing a deepwater subsea pipeline tie-in

By Huy Phan, Oran Tarlton and John Charalambides
Padding large-diameter pipelines
New control system improves excavator accurancy
Completing a deepwater subsea pipeline tie-in
Meeting today’s welding challenges

By A Staff Report
Improving pipe-handling safety
Advancing the art of pipeline padding
Troubleshooting common welding problems
Sidebooms continue to evolve
Five major factors in LNG plant design

By H. Kotzot, C. Durr, D. Coyle, and C. Caswell, KBR
New design enhances pipeline stability
Taking line pipe to new depths

By Martin Connelly, Corus Tubes Energy
Improving valve placement

By David A. Weir, Yanping Li, Enbridge Pipelines Inc.
Reducing pipeline noise

By Jonathan Chui, Professional Engineer,Golder Assoc.
Welding high strength line pipe
Improving Pipeline Design

By Brian Payne, P.E., EDM Services, Inc.
Building teh Langeled System

By Leif Solberg and Erling Gjertveit, StatoilHydro
Developing Offshore LNG Facilities
Connecting Deepwater Pipelines

By Ian Frzer, Frederic Monnot, John Fletcher, Acergy
Engineering for Extreme Environments

	Copyright© 2010 Hart Energy Publishing, LP 1616 S. Voss, Suite 1000, Houston, Texas 77057-2627 Tel: (713) 260-6400; Fax: (713) 840-8585	About Us \| Advertise \| Subscribe \| Legal Notice \| Contact \| Customer Service \| Site Map
	Visit Our Other Sites: Hart Energy \| Oil and Gas Investor \| E&P \| PipeLine and Gas Technology \| Unconventional Gas Center \| A&D Center \| IFQC \| World Fuels \| ISEE \| Hart Conferences \| BioFuels \| FUEL \| WRFS All rights reserved. Reproduction in whole or in part, in any form or medium without express written permission is prohibited.